| Test Num
|
Category
|
Test Description
|
Expected Output
|
How to test
|
Assigned-to
|
|
|
|
|
|
|
|
| 1
|
Installation
|
Make sure that the new watchdog is installed and configured successfully
|
|
|
|
| 2
|
Upgrade
|
Make sure that pgpool II with new watchdog can be installed on a system running pgpool II with the old watchdog
|
|
|
|
| 3
|
Configuration
|
Make sure that pgpool II can be configured successfully with one primary and one stand-by configuration
|
|
|
|
| 4
|
Setup
|
Three pgpool instanses (Host-1, Host-2, Host-3) are running on different machine using Ubutu 13:04. Connect to Host-1 and execute a sample query
|
Configruation
|
|
|
| 4.1
|
Functional testing
|
Shutdown Host-1's pgpool instanse and execute query again
|
Host-2 should take and respond to query
|
|
|
| 4.2
|
Functional testing
|
Shutdown Host-2's pgpool instanse and execute query again
|
Host-3 should take and respond to query
|
|
|
| 4.3
|
Functional testing
|
Start Host-1's pgpool instanse and execute query again
|
Need to see which host will respond to query
|
|
|
| 5
|
Failover scenarions / Setup
|
Three pgpool instanses (Host-1, Host-2, Host-3) are running on different machine using Ubutu 13:04. Connect to Host-1 and execute a sample query
|
Configruation
|
|
|
| 5.1
|
Failover scenarios
|
Un-Plug Host-1's network cable and execute query again
|
Host-2 should take and respond to query
|
|
|
| 5.2
|
Failover scenarios
|
Un-Plug Host-2's network cable and execute query again
|
Host-3 should take and respond to query
|
|
|
| 5.3
|
Failover scenarios
|
Plug Host-1's network cable execute query again
|
Need to see which host will respond to query
|
|
|
| 6
|
Functional testing / Setup
|
Three pgpool instanses (Host-1, Host-2, Host-3) are running on different machine using Ubutu 13:04. Connect to Host-1 and execute a long query
|
|
|
|
| 6.1
|
Functional testing
|
Shutdown / Power Off Host-1's instanse and execute query again
|
Host-2 should take over and start responding, need to see the already running query response.
|
|
|
| 6.2
|
Functional testing
|
Shutdown / Power Off Host-2's instanse and execute query again
|
Host-3 should take over and start responding, need to see the already running query response.
|
|
|
| 6.3
|
Functional testing
|
Start Host-1's pgpool instanse and execute query again
|
Need to see which host will respond to query
|
|
|
| 7.1
|
Cheking other functionality of watchdog
|
Changing active/standby state in case of certain faults detected
|
|
|
|
| 7.2
|
Cheking other functionality of watchdog
|
Automatic virtual IP address assigning synchronous to server switching
|
|
|
|
| 7.3
|
Cheking other functionality of watchdog
|
Automatic registration of a server as standby in recovery
|
|
|
|
| 8
|
Isolated master scenario / Setup
|
Three pgpool instanses (Host-1, Host-2, Host-3) are running on different machine using Ubutu 13:04. Connect to Host-1 and execute a query
|
|
|
|
| 8.1
|
Isolated master scenario
|
Break the connectivity between pgpool watchdog primary and stand node by bringing down connectivity on the stand-by.
|
Split brain testing ensures that their is only one master at a time that the clients can connect to. The stand-by should be promoted as the primary and the clients shouldn't be able to connect to the old master.
|
|
|
| 9
|
Networking Isolation scenarion
|
|
|
|
|
| 9.1
|
|
|
|
|
|
| 10
|
Database Failure
|
|
|
|
|
| 10.1
|
|
|
|
|
|
| 10.2
|
|
|
|
|
|
| 11
|
Watchdog agent failure
|
|
|
|
|
| 11.1
|
|
|
|
|
|
| 11.2
|
|
|
|
|
|