pgpool_setup creates a temporary installation of Pgpool-II cluster, which includes a Pgpool-II installation and specified number of PostgreSQL installations under current directory. Current directory must be empty before running pgpool_setup.
pgpool_setup is for testing purpose only and should not be used to create production installations.
pgpool_setup executes ssh against localhost. You need to configure ssh so that it can login to localhost without password.
Currently pgpool_setup supports streaming replication mode, native replication mode, raw mode, logical replication mode and snapshot isolation mode. To support watchdog, see watchdog_setup for details.
pgpool_setup accepts the following command-line arguments:
Specifies the running mode. mode can be r (native replication mode), s (streaming replication mode), n (raw mode), l (logical replication mode), y (slony mode) or i (snapshot isolation mode). If this is omitted, s is assumed.
Specifies the number of PostgreSQL installations. If this is omitted, 2 is used.
Specify the base port number used by Pgpool-II and PostgreSQL. Pgpool-II port is base_port. pcp port is base_port + 1. The first PostgreSQL node's port is base_port + 2, second PostgreSQL node's port is base_port + 3 and so on.
If -pg option is specified, the first PostgreSQL node's port is assigned to pg_base_port, the second PostgreSQL node's port is pg_base_port + 1 and so on.
If this is omitted, 11000 is used.
Specify the base port number used by PostgreSQL. The first PostgreSQL node's port is base_port + 2, second PostgreSQL node's port is base_port + 3 and so on.
If this is omitted, base_port+2 is used.
Do not stop pgpool and PostgreSQL after the work.
Start pgpool with debug mode.
In streaming replication mode, use replication slot instead of archive. Since the archive directory is shared by all PostgreSQL clusters, if a standby is promoted, the time line in the archive directory will be changed and other standby servers will be stopped. Using a replication slot does not have this problem and is always preferable if you can use PostgreSQL 9.4 or later, which supports replication slot. The replication slot name used by pgpool_setup is pgpool_setup_slot.
Use pg_rewind command in recovery script (basebackup.sh). If the command fails, switch to use ordinal rsync command. In certain cases recovery using pg_rewind is much faster than rsync since it does not copy whole database cluster.
Omit to create PostgreSQL database This option is intended to be used by watchdog_setup and probably useless for other purposes.
Set some additional parameters to pgpool.conf so that the regression test can performs tests against existing installation. Currently the parameter is health_check_test.
Use the sample scripts and configuration files installed in /etc/pgpool-II/ directory.
This option was added for the purpose of testing the sample scripts and configuration files contained in Pgpool-II RPM packages. Make sure you have installed the sample scripts and configuration files in /etc/pgpool-II/ directory before you specify this option.
pgpool_setup recognizes following environment variables:
Specifies the Pgpool-II installation directory. Pgpool-II binaries is expected to be placed under PGPOOL_INSTALL_DIR/bin and pgpool.conf and pool_hba.conf etc. are expected to be placed under PGPOOL_INSTALL_DIR/etc. The default is /usr/local.
Specifies the path to Pgpool-II configuration files. The default is PGPOOL_INSTALL_DIR/etc.
Specifies the path to PostgreSQL commands such as initdb, pg_ctl and psql. The default is /usr/local/pgsql/bin.
Specifies the path to PostgreSQL shared libraries. The default is /usr/local/pgsql/lib.
Specifies the path to Unix socket directory. The default is /tmp.
Specifies the arguments for initdb command. The default is "--no-locale -E UTF_8".
If "true", in streaming replication mode, use replication slot instead of archive. This brings the same effect as "-s" option is specified.
If "true", in streaming replication mode, use pg_rewind in basebackup.sh script. This brings the same effect as "-r" option is specified.
If "true", act as if "-t" option is specified.
If "true", act as if "-c" option is specified.
$ pgpool_setup PostgreSQL major version: 124 Starting set up in streaming replication mode creating startall and shutdownall creating failover script creating database cluster /tmp/test/data0...done. update postgresql.conf creating pgpool_remote_start creating basebackup.sh creating recovery.conf creating database cluster /tmp/test/data1...done. update postgresql.conf creating pgpool_remote_start creating basebackup.sh creating recovery.conf temporarily start data0 cluster to create extensions temporarily start pgpool-II to create standby nodes node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------+-------------------+------------------------+--------------------- 0 | /tmp | 11002 | up | 0.500000 | primary | 0 | true | 0 | | | 2020-08-18 13:50:19 1 | /tmp | 11003 | down | 0.500000 | standby | 0 | false | 0 | | | 2020-08-18 13:50:18 (2 rows) recovery node 1...pcp_recovery_node -- Command Successful done. creating follow primary script node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------+-------------------+------------------------+--------------------- 0 | /tmp | 11002 | up | 0.500000 | primary | 0 | true | 0 | | | 2020-08-18 13:50:19 1 | /tmp | 11003 | up | 0.500000 | standby | 0 | false | 0 | | | 2020-08-18 13:50:23 (2 rows) shutdown all pgpool-II setting for streaming replication mode is done. To start the whole system, use /tmp/test/startall. To shutdown the whole system, use /tmp/test/shutdownall. pcp command user name is "t-ishii", password is "t-ishii". Each PostgreSQL, pgpool-II and pcp port is as follows: #1 port is 11002 #2 port is 11003 pgpool port is 11000 pcp port is 11001 The info above is in README.port. t-ishii$ ./startall waiting for server to start....5744 2020-08-18 13:50:27 JST LOG: starting PostgreSQL 12.4 on x86_64-pc-linux-gnu, compiled by gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, 64-bit 5744 2020-08-18 13:50:27 JST LOG: listening on IPv4 address "0.0.0.0", port 11002 5744 2020-08-18 13:50:27 JST LOG: listening on IPv6 address "::", port 11002 5744 2020-08-18 13:50:27 JST LOG: listening on Unix socket "/tmp/.s.PGSQL.11002" 5744 2020-08-18 13:50:27 JST LOG: redirecting log output to logging collector process 5744 2020-08-18 13:50:27 JST HINT: Future log output will appear in directory "log". done server started waiting for server to start....5757 2020-08-18 13:50:27 JST LOG: starting PostgreSQL 12.4 on x86_64-pc-linux-gnu, compiled by gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, 64-bit 5757 2020-08-18 13:50:27 JST LOG: listening on IPv4 address "0.0.0.0", port 11003 5757 2020-08-18 13:50:27 JST LOG: listening on IPv6 address "::", port 11003 5757 2020-08-18 13:50:27 JST LOG: listening on Unix socket "/tmp/.s.PGSQL.11003" 5757 2020-08-18 13:50:27 JST LOG: redirecting log output to logging collector process 5757 2020-08-18 13:50:27 JST HINT: Future log output will appear in directory "log". done server started t-ishii$ psql -p 11000 test psql (12.4) Type "help" for help. test=# show pool_nodes; node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change ---------+----------+-------+--------+-----------+---------+------------+-------------------+-------------------+-------------------+------------------------+--------------------- 0 | /tmp | 11002 | up | 0.500000 | primary | 0 | true | 0 | | | 2020-08-18 13:50:32 1 | /tmp | 11003 | up | 0.500000 | standby | 0 | false | 0 | streaming | async | 2020-08-18 13:50:32 (2 rows)